To avoid probable faults, please read the following instructions and use the
remote controller properly.
•
Please switch off the display when it is not used, and enable the function of
Audio Only when you do not need to watch the display, helping to reduce power
consumption and save energy.
•
On the premise of ensuring viewing effect, the energy consumption can be reduced
by lowering display brightness.
•
To better save energy, the automatic power-off function is configured for the display
and the default duration is 10 minutes. If no operation is performed in 10 minutes,
the display is switched automatically to sleep mode (the same as power off) for
reducing energy consumption.
Press ECO on the remote controller to enter the backlight mode page. Press ECO
to switch among ECO, Auto and Standard.
In the ECO mode, the power output is reduced 50%.
In the Auto mode, the display automatically adjusts the screen brightness
according to the light in the environment. When the light is strong, the screen
brightens. When the light is weak, the screen darkens.
In the Standard mode, the screen brightness keeps the same.
To Next Page
Loading...