Use the battery correctly.
•
Galvanic corrosion, electric leakage and even fire may be caused by improper
battery usage.
•
It is recommended to use the designated type of battery and install the battery
by correct electrodes (positive and negative electrodes).
•
Do not install and use new battery together with the used one.
•
Take out the battery if the remote control is not used for a long period.
•
Do not expose the battery to overheated environments such as sunlight and
fire.
•
Dump the used battery based on local regulations.
Do not open the cover or change the product by your own.
High voltage components are installed in the product. When you open the
cover, high voltage, electric shock or other dangerous situations may occur. If
inspection, adjustment or maintenance is required, contact the local distributor
for help.
Use the specified power supply.
•
Do not use any types of power cables other than the one provided with the
product to prevent the product from being damaged.
•
Use a three-wire socket and ensure that it is properly grounded.
•
Pull out the power plug from the socket if the product is not used for a long
period.
Before you move the product, disconnect all external connections
and separate all toppling preventing devices!
Move the product carefully to prevent it from being hit or squeezed, especially the
screen, which may cause injury if broken.
Clean the dust and metal on the power plug regularly.
•
When you are cleaning, fire or electric shock may be caused if the product is
powered on.
•
Keep in mind to pull out the power plug before cleaning it by using a dried cloth.
Do not put items on the top of the product.
•
Do not put items, such as a container for liquid (a vase, flowerpot, cosmetics or
liquid medicine), on the top of the product.
•
If any water or liquid is spilled on the product, short circuit may occur and
cause fire or electric shock.
•
Do not tread on the product or hang any items on the product.
SAFETY INSTRUCTION
To Next Page
Loading...