General Excalibur 40-200C

RECOMMENDED OPTIONAL ACCESSORIES
We offer some optional accessories available from your local General International dealer for increased con-
venience, productivity, accuracy and safety when using your router table.
For more information about our products, please visit our website at www.general.ca
Dust collector
We offer a wide selection
of top quality dust collec-
tors to suit all your
shop needs. Dust
collectors contribute
to a cleaner more
healthful workshop
environment.
Shim
#40-626
Shim for Milwaukee router,
model 5625/5626.
Vertical featherboard
#40-160
For Excalibur router table.
Horizontal
featherboard
#40-175
For Excalibur router table.
9 1/4” x 11 3/4”
Phenolic insert plate
#40-114
For Excalibur router tables.
9 1/4” x 11 3/4”
Aluminum insert plate
#40-115
For Excalibur router tables.
Reducer collar
(fits 3 1/2” motor)
#40-312
For Excalibur router lift
#40-125.
Reducer collar
(fits 3 1/4” motor)
#40-314
For Excalibur router lift
#40-125.
Flip stop
#40-090
For Excalibur router fence
#40-065 (bench top model)
& #40-080 (floor model).
4 pc zero clearance
insert ring set
#40-074
For Excalibur 9 1/4” x 11
3/4” router plates
4 pc insert ring set
1⁄4”, 1⁄2”, 2 1⁄2” & 1
3/8” (30 mm for #40-
099)
#40-076
28
9 pcs brass precision tem-
plate guide set
#40-099
Designed for most routers.
Included accessories:
• 1 locking nut
• 8 guides: 1 1 19⁄64”, 5/8”,
27⁄32”, 17⁄32”, 17⁄64”, 9⁄32”,
11⁄32”, 13⁄32”.
Stock pusher
#40-120
For Excalibur router
fence #40-065 (bench
top model) & #40-080
(floor model).