Genesis Electrified GV70 - Page 491

7-81
07
Warning volume
OJKEV072261LOJKEV072261L
With the vehicle on, select ‘Driver
assistance → Warning volume’ or ‘Sound
→ Driver assistance → Warning volume’
from the Settings menu to change the
Warning volume ‘High’, ‘Medium’, ‘Low’
or 'Off' for Smart Cruise Control.
If 'Driving safety priority' is selected, the
vehicle lowers all other audio volumes
when the warning sounds for safe
driving.
Information
• If the vehicle is restarted, Warning
volume will maintain the last setting.
• If 'Off' is selected, steering wheel
vibration will not turn off.
• If you change the Warning volume,
the Warning volume of other Driver
Assistance systems may change.
Smart Cruise Control operation
Operating conditions for basic
function
Basic function
Smart Cruise Control operates when the
following conditions are satisfied.
• The gear is in D (Drive)
• Your vehicle speed is within the
operating speed range
- 10-200 km/h (5-120 mph): when
there is no vehicle in front
- 0-200 km/h (0-120 mph): when
there is a vehicle in front
• ESC (Electronic Stability Control) or
ABS (Anti-Lock Braking System) is on
Smart Cruise Control does not operate in
the following conditions.
• The driver's door is opened
• Your vehicle is in power down mode
(
)
• EPB (Electronic Parking Brake) is
applied
• ESC (Electronic Stability Control) or
ABS (Anti-Lock Braking System) is
controlling the vehicle
• Forward Collision-Avoidance Assist
brake control is operating
• Remote Smart Parking Assist brake
control is operating (if equipped)
• Hands-off warning for Lane Keeping
Assist and Highway Driving Assist is
on
Information
When stopped behind another vehicle, the
driver can turn on Smart Cruise Control
while the brake pedal is depressed.