7-82
Driver assistance system
Operating conditions for
Acceleration Assist
Overtaking Acceleration Assist operates
when the turn signal indicator is turned
on to the left (left-hand drive) or turned
on to the right (right-hand drive) while
Smart Cruise Control is operating, and
the following conditions are satisfied:
• Your vehicle speed is above 60 km/h
(40 mph)
• A vehicle is detected in front of your
vehicle
Overtaking Acceleration Assist does not
operate in the following conditions.
• The hazard warning flasher is on
• Vehicle speed is reduced to maintain
distance with the vehicle in front
• When the turn signal indicator is
or turned on to the right (right-
•
Acceleration Assist will operate when
using the function in countries with
check the road conditions at all
Turning on Smart Cruise Control
OJKEV071118OJKEV071118
• Press the Driving Assist button to turn
on Smart Cruise Control. The speed
will be set to the current speed on the
cluster.
• If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
Information
If your vehicle speed is between 0-30 km/h
(0-20 mph) when you press the Driving
Assist button, the Smart Cruise Control
speed will be set to 30 km/h (20 mph).
To Next Page
Loading...
