44-00-0297 SHERLOCK102/202 REV. 4.1 05-02-15
19
SHERLOCK AUTO ALARM DIALER MODEL 400
When an alarm is detected, the 400 can notify up to four people
by making voice phone calls. It will continue to make phone
calls until someone responds to the call. The voice messages can
be custom recorded, so you get to describe each alarm message
that it speaks in your own voice.
A built-in output relay is provided to switch an external device
automatically, or manually. You can use it to have a local light
or siren trip when an alarm occurs, or even to set off a local
alarm when the phone line is cut or unplugged.
DIMENSIONS 7.5 x 2.0 x 8.5 (190 x 51 x 216)
Inches(mm)
BATTERIES (6) 1.5 Volt “D” cell alkaline Telephone
Connection: FCC approved RJ-11 plug-
in modular connector with 6’ cord.
OPERATING TEMPERATURE
Unit should be kept between
32°F - 120°F (0°C - 49°C)
TEMPERATURE SENSING RANGE
-
20ºF - 150ºF (
-
29°C - 66°C),
with remote temperature sensor.
NRTL listed for compliance with U.L. Standard 1459.
FAIL SAFE REMOTE ALARM and REMOTE
ALARM WITH STROBE
This device will alert the user to an alarm condition it is acti-
vated by opening up a self looping dry contact signal. The base
has a built-in red led, and blue strobe light to signal an alarm.
The unit is equipped with a test and silence button. After the
silence action, the buzzer is silent for 30 minutes and will be
reactivated if the alarm condition still exists. The remote alarm
with strobe comes standard with a wall mountable bracket.
HOUSING INDOOR
Remote Alarm
5 1/8" x 5 3/8" x 1 1/2"
Remote Alarm w/Strobe
5 1/8" x 5 3/8" x 5"
POWER INPUT Remote alarm - 12VDC 200ma
with strobe - 12VDC, 500ma
wall mounted transformer
SOUND OUTPUT 90db at 2 ft
FLASHING RATE 60 to 100 flashes/min.
LENS High impact resistant, standard blue
lens. Red and Amber available
STROBE LIGHT/AUTO DIALER / REMOTE ALARM
STROBE LIGHT
Makes any alarm visible during an emergency. High-powered “U” shaped xenon
bulb flash is visible for miles.
HOUSING: Rain tight; high impact resistant, clear blue, red or amber
lens; black, high impact resistance ABS base
SIZE: 4” x 3”
POWER INPUT: 12VDC, 150ma ±20%
FLASH RATE: Approx. 60 to 100 flashes/min.
To Next Page
Loading...
Need help?
General
