4.6 START / STOP
START/STOP [ ] button is used to start or stop the centrifugation.
4.6.1 START
Action
4.6.2 STOP
Action
After setting the RPM/RCF, Time, TEMP and ACC/DEC,
touchSTART/STOP [ ] button.
When the rotation starts, the ‘START LED’ is turned on.
[START/STOP] buttoncan be readyonly when the lid is closed.
When you touch [ENTER] button during operation, display
window shows the saved setting parameters.
Touch [ ] button to stop spinning.
If you touch [START/STOP] button,
the operation stops
immediately.
When you touch [START/STOP] button twice, the operation is
stopped with DEC 9.
1
1
Note! Stop at the Maximum Braking Deceleration
• Touch [ ] button twice for the fastest deceleration. And the rotation stops at the maximum
deceleration rate (DEC9) regardless of the set DEC value.
To Next Page
Loading...