Refrigerated High-Speed Micro Centrifuge, 1730R
7
3. Installation
3.1 Power On/Off and Lid Release
3.1.1 Power On/Off
Action
3.1.2 Lid Release
For lidopening, the lid button [ ] is used.
Display shows the status of the lid(open , closed ).
Action
Connect the AC power cord to the power socket on the back of the
instrument and put the plug into the outlet.
Check the proper power.
Turn on the instrument by pressing thepower switch on the right
side of the instrument. Turn on the switch [ I ].
Touch [LID] button when the lid is closed (Lid LED shows off).
When the lid is open, the display status changes from to
and lid LED tu
rns on.
1
1
2
To Next Page
Loading...