BRAIN 17 39 732788 - Rev. A_1
ENGLISH
Display Function
Default
dc
BOARD CONFIGURATION DOWNLOAD:
This function lets you save the board configuration in the USB memory in
order to store (parameter
01) or copy the configuration to other systems
(parameter
00).
If + and – are pressed simultaneously for at least 5 seconds, the following
selection values will appear:
01 = Storage: the configuration file will be saved in the format BRN17_xxx.prg
where xxx=000/001/002 etc. depending on how many configuration files there
are in the USB memory.
00 = Copy: the configuration file will be saved in the format BRN17.prg by
overwriting any other configuration file present with the same name, so it can
be used to upgrade another system.
Press + and - to select the desired parameter and, by pressing F, the board
will proceed to save the file and display
Y when done correctly, or no in case
of errors during saving.
--
dr
BOARD RADIO CODE DOWNLOAD:
This function lets you save in the USB memory the board radio codes in order to
store (parameter
01) or copy the radio codes to other systems (parameter 00).
If + and - are pressed simultaneously for at least 5 seconds, the following
selection values will appear:
01 = Storage: the radio codes file will be saved in the format BRN17_xxx.rad
where xxx=000/001/002 etc. depending on how many radio codes files there
are in the USB memory.
00 = Copy: the radio codes file will be saved in the format BRN17.rad by
overwriting any other radio codes file present with the same name, so it can
be used to upgrade another system.
Press + and - to select the desired parameter and, by pressing F, the board
will proceed to save the file and display
Y when done correctly, or no in case
of errors during saving.
--
To Next Page
Loading...
