Zenith15/25 GNSS Series - 12 -
Installation Guide © 2017 GeoMax AG, Widnau, Switzerland
When prompted by the handheld for where to install, choose Device. Once the
installation process is completed, the FieldGenius/ Layout Pro software can be started by
selecting it from the Windows Mobile Start Menu.
4.4 REGISTRATION OF FIELDGENIUS
When FieldGenius is started, a registration window with the Device ID is displayed as
shown below. It is possible to use FieldGenius without registration by tapping Run Demo
Mode. This provides full functionality, but is limited to the storage of 30 points.
To register your version of FieldGenius/ Layout Pro, an activation key needs to be
entered. The displayed Device ID together with the GUID (Global Unique IDentity) is used
to obtain the key. The GUID can be found on the printed FieldGenius card that was
supplied together with your Zenith15/25 equipment.
To Next Page
Loading...
Need help?
General
