Zenith15/25 GNSS Series - 8 -
Installation Guide © 2017 GeoMax AG, Widnau, Switzerland
3.5 ANTENNA MANAGEMENT
If you have a Base-Rover setup all available GeoMax GNSS antennas (except
Zenith35/Zenith35 Pro) are currently supported in the antenna management by default. To
make sure you get the correct results when you are using as base a Zenith35/Zenith35 Pro or
any other antenna you need to add this specific antenna manually.
With the receiver connected to Assistant, select Antenna Management from the side
menu.
To Next Page
Loading...
