Zenith15/25 GNSS Series - 3 -
Installation Guide © 2017 GeoMax AG, Widnau, Switzerland
1 INTRODUCTION
This guide provides complete step-by-step instructions for preparing the Zenith15 and
Zenith25 Pro GNSS series for measuring work. The instructions cover all the required
installation tasks for the Zenith GNSS receiver, Getac PS336 handheld and FieldGenius/
Layout Pro software.
Only the tasks required for the initial setup of a new Zenith15/25 Pro system are
described in this document. For further information regarding the operation of the
Zenith15/25 Pro components, please refer to the respective User Manuals.
The User Manual for the GNSS receiver is available from the Zenith15/25 Pro CD and also
from the GeoMax Partner Area. The Getac PS336 User Manual can be downloaded from
Getac’s website, at http://en.getac.com/support/downloads.html.
To Next Page
Loading...
Need help?
General
