GeoMax Zeta125 - Page 30

Product Overview Zeta125/ Zeta125s | 29
EN
Insert and
remove the
battery of the
remote control
Step Description

If the LED on the remote control is flashing red while sending, the
batteries are low.
1. Loosen the six screws on the back case of the remote control to open
the battery housing.
2. Take the back case.
3. Replace the batteries.

Always use three new batteries size AA (LR6) of the same type.
3
3
2
1
008394_001
GeoMax_Zeta125_Zeta125s_UM_v1.0.0_en.fm Page 29 Friday, November 28, 2014 9:23 AM