Zeta125/ Zeta125s | 32Product Overview
EN
3.2 Basic Handling
Turning on
Step Description
1.
Press the ON/OFF key .
2. Each time the laser is switched on, the
battery power level is tested. The display
shows the start-up screen first and then the
capacity of the battery.
3. After initialising the laser beam automati-
cally, the system moves to the last entered
grade.
4. A flashing laser beam symbol indicates the active self levelling. When
the symbol is lit, the laser is levelled and the laser beam is continu-
ously on.
To Next Page
Loading...
