Care and Transport Zeta125/ Zeta125s | 67
EN
6.4 Cleaning and Drying
Basic Cleaning Basic cleaning is recommended to ensure proper functionality of the instru-
ment.
• Blow off dust.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the
cloth with water or pure alcohol. Other liquids and solvents than water or
alcohol may attack the polymer components.
Only use filtered, oilfree compressed air to blow off dust and for
cleaning purpose.
Cables and plugs Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the
connecting cables.
Damp products Dry the product, the transport container, the foam inserts and the accessories
at a temperature not greater than 40°C/104°F and clean them. Remove the
battery cover and dry the battery compartment. Do not repack until everything
is dry. Always close the transport container when using in the field.
GeoMax_Zeta125_Zeta125s_UM_v1.0.0_en.fm Page 67 Friday, November 28, 2014 9:23 AM
To Next Page
Loading...
Need help?
General
