35
English
at the cursor’s position. A circle
containing the number 1 will
show. The info windows show
the distance, bearing, time to
reach the target waypoint and
time of arrival.
Press the PAGE key to go back to
Navigation mode. To add more
waypoints, press CURSOR and
repeat the operations described
above.
As new waypoints are added, the
numbering will increase progres-
sively.
In case of error, waypoints can
be deleted by pressing the CLR key
(Cursor mode), starting from the
last entered. To go back to Navi-
gation mode, press PAGE.
If an autopilot is connected to the
GEONAV, the plotted route is au-
tomatically followed as soon as the
Navigation mode is enabled.
NOTE: The cursor can be moved to the de-
sired position by using the GOTO function as
well. See the relevant sections for more de-
tails.
To Next Page
Loading...
