59
English
GOTO PORT
Press the GOTO key and select
PORT by CURSOR.
The list will display the latest
ten ports previously selected.
Choose the desired port by CUR-
SOR, or select New to display the
whole list of the ports stored in
the cartridge.
By moving the CURSOR key in the
four directions, form the port
name, or part of it; when the
desired port is shown, highlight
it by CURSOR and confirm its se-
lection by pressing ENTER.
Once the desired port has been
selected, the GEONAV will in-
sert a waypoint in the port posi-
tion and append the new leg to
the existing route (if no route is
available, the new waypoint will
be connected to the boat’s posi-
tion).
Press the PAGE key to go back to
Navigation mode and enable au-
tomatically the Autozoom func-
tion.
Goto Port
To Next Page
Loading...
