63
English
Setup
SETUP
The Setup menu allows setting the available options.
To access the Setup menu, press GOTO to display the main
menu, then select SETUP by using the CURSOR key. The menu
items are grouped in six sets. When selecting a set by the
CURSOR key, the list of the available options will be displayed.
Press ENTER to select one set, then use the CURSOR key to
switch from one option to another and edit the setting.
To go back to the set list, press PAGE.
DISPLAY
• Mode (BRIGHT/DAY/NIGHT)
Selects the colors suitable for
the brightness of the envi-
ronment.
• Safety Depth (OFF/2m/5m/
10m/20m)
Enables the display of the
areas corresponding to the
depth safety limit.
• Depth Contours (ALL/5m/
10m/20m)
Selects the display of depth
contours.
• Photo Overlay (LAND/FULL/
OFF)
Selects the enabling of the overlay of satellite photographs
for charts: only on land, everywhere or off, respectively.
• Chart Rotation (ON/OFF)
Enables/disables the Chart Rotation function.
• Set Chart Detail (STD/USER/ALL)
Selects the chart details to display. It is possible to select
one of the two settings available (STD - equivalent to the
standard display setting, as defined by ECS regulations -
and ALL, that enables the display of all the items on the
chart).
To Next Page
Loading...
