Geonav 4C - Track Recording and Management; Starting and Stopping Tracks; Storing and Recalling Tracks

51
English
A message will confirm that the route has been stored cor-
rectly. Once stored, the route will disappear from the screen.
Recalling a route from the CompactFlash™
Press the GOTO key to display the menu, select ROUTE, OLD
and press ENTER to open the route catalog; select the route by
the CURSOR key and then press ENTER to confirm, or PAGE to
exit.
The route recalled will be displayed, the Autozoom function
automatically enabled and a window will allow selecting the
target waypoint.
Deleting a route
To delete the route displayed, press the GOTO key to show the
menu, select ROUTE, CURRENT, DELETE and press ENTER to
confirm.
To delete a route stored in the CompactFlash™, press the GOTO
key to show the menu, then select ROUTE, OLD.
Select the route from the list of the routes stored in the
CompactFlash™, then press CLR to delete it and ENTER to con-
firm the operation.
Reversing a route
Press the GOTO key to display the menu, then select ROUTE,
CURRENT, REVERSE.
The waypoint order will be automatically reversed allowing
navigation in the opposite direction.
Route to a waypoint
Press the GOTO key, select ROUTE, CURRENT, GOTO WP and
move the cursor within the waypoint list by using the CURSOR
key. Press ENTER and select the target waypoint by CURSOR.
Press ENTER to confirm the selection, or PAGE to exit.
As the GEONAV plots a new route, the waypoint selected be-
comes the first waypoint in the route, whereas previous