57
English
FUNCTIONS IN THE MARKER MENU
Storing a set of markers in the
CompactFlash™
Press the GOTO key to display the
menu, select MARKER, CUR-
RENT, SAVE ALL and press EN-
TER to confirm. Use the CURSOR
key to change the default name
and press ENTER to confirm.
A message will confirm that
markers have been stored cor-
rectly. Once stored, markers will
disappear from the screen.
Each time a set of markers is
stored in the CompactFlash™,
the plotter memory is cleared and
the indicator of the markers avail-
able is reset to the maximum
value.
Recalling a set of markers from the CompactFlash™
Press the GOTO key to display the menu, select MARKER, OLD
and press ENTER to open the marker catalog.
Use the CURSOR key to select the set of markers desired and
press ENTER to confirm, or PAGE to exit.
Deleting markers
To delete the set of markers displayed, press the GOTO key to
show the menu, select MARKER, CURRENT, DELETE ALL
and press ENTER to confirm.
To delete a single marker among those displayed, press the
GOTO key to show the menu, select MARKER, CURRENT and
GOTO MARKER. Select the marker desired from the list shown,
then press CLR to delete it and ENTER to confirm the operation.
To Next Page
Loading...
