71
English
Once you have completed the operations described above, to
disconnect the unit from the PC:
• quit the USB connection on the PC by clicking the remov-
able disk icon by the mouse right-button and selecting
“Eject”;
WARNING: If you do not carry out this operation, the transferred data might get lost.
• quit the USB connection on the GEONAV by pressing PAGE;
• disconnect the unit’s USB cable from the PC;
• switch the unit off.
Software Updating
Free software upgrades are available from the web site
www.geonav.it.
Save the software upgrade to the CompactFlash™ of your
GEONAV by using the USB connection.
Switch the unit off and then on again, to update the software
automatically.
IMPORTANT: You are recommended to save the software upgrade to the main
directory of the GEONAV, and not to its subdirectories.
To Next Page
Loading...
