GeoVision GV-NVR System Lite V2 User Manual

Mobile Phone Connection
45
5
3. Click the button located at the lower left corner (Figure 5-2). The login screen
appears.
Figure 5-5
4. Enter the IP address of the GV-NVR System Lite V2, port value (default value is 5511), a
username and a password. Then click OK to connect.
5. Select the desired recording on the event list for playback.

GeoVision GV-NVR System Lite V2 Specifications

General

Brand	GeoVision
Model	GV-NVR System Lite V2
Category	Network Hardware
Language	English