GeoVision GV-NVR System Lite V2 User Manual

68
Playing Back the Recordings
To retrieve the events recorded on the GV-NVR System Lite V2 and play them back:
Note: The remote playback (RPB) function is only supported if the video was recorded with
a resolution of CIF or lower.
1. On the main screen, click the Network button, select Run ViewLog Server, and click OK
to allow the remote playback access (Figure 5-4).
2. Run GV-iView on your mobile device.
3. On the login screen, tap RPB View
.
4. Enter the IP address of the GV-NVR System Lite V2, port value (default value is 5511), ID
and Password. You can also search the recordings after a specified date and time by
selecting RPB Time Setting and entering the date and time. Then, tap Connect.
Figure 5-40 Figure 5-41

GeoVision GV-NVR System Lite V2 Specifications

General

Brand	GeoVision
Model	GV-NVR System Lite V2
Category	Network Hardware
Language	English