27
7. Configuring the NAS
You can set GV-IP Cameras and GV-Target Cameras to record to NAS (Network-attached
Storage).
IMPORTANT:
1. For the NAS application, it is required to use GV-IP Cameras (firmware V3.0 or later) and
GV-Target Cameras (firmware V1.02 or later), GV-EFD2101/EFD3101/EVD2100/EVD3100
(firmware V1.00 or later).
2. For system performance and compatibility, it is highly recommended to use GV-NAS
Systems for recording.
3. Make sure the computer installed with GV-Edge Recording Manager is under the same
LAN with the NAS.
4. By default, all the username and password in the NAS application are admin. To use a
different set of username and password, type in the Username and Password fields.
1. On the top of main screen, click Tools and then click Utilities. The Utilities window
appears.
2. Click
to show the Storage Setup page.
To Next Page
Loading...
Need help?
General
