10
PTZ and PT Camera
There are two types of default settings: camera default settings and system default
settings. Camera default settings include all settings on Iris, White Balance, Image Reverse
and Other in the VISCA OSD Configuration dialog box. System default settings refer to all the
settings of the PTZ / PT camera except the camera settings.
To load camera default settings (only available in PTZ camera):
1. On the left menu of Web interface, select Digital I/O and PTZ, select PTZ Settings, and
select System Configure. The VISCA OSD Configure dialog box appears.
2. Click the Load Camera Default button.
To load system default settings:
1. Unplug the power cable and the network cable (or the PoE cable).
2. Press and hold the default button.
Load
Default
To Next Page
Loading...
Need help?
General
