Gerber Technology AccuPlot AP-100 User Manual

Starting and Stopping the Plotters
2-2 Power On and Initialization
4. Press Enter to display page one of the Offline menu.
Initializing the Plotter
Initializing clears the plotter memory buffer and positions the pen assembly at
the origin (starting) position. Initializing also loads the operating parameters
currently defined for the plotter.
You must initialize the plotter after turning the power on and after any
emergency stop.
TO INITIALIZE THE PLOTTER
1. From page one of the Offline menu, press F2-INITIALIZE. To interrupt the
process, press F3-STOP.
2. Once initialization is complete, page one of the Offline menu appears in
the control panel window again.
OFFLINE . . .
ONLINE PAPER ADV
INITIALIZE ORIGIN
OFFLINE . . .
ONLINE PAPER ADV
INITIALIZE ORIGIN
INITIALIZING . . .
STOP

Gerber Technology AccuPlot AP-100 Specifications

General

Brand	Gerber Technology
Model	AccuPlot AP-100
Category	Plotter
Language	English