Gerber Technology AccuPlot AP-100 User Manual

Offline Operation
4-12 Plotter Parameters
Changing Plotter Parameters
The procedure for changing parameters is similar for all types of parameters.
TO ACCESS THE CHANGE PARAMETER MENUS
1. From page one of the Offline menu, press the Menu key one time to
display page two.
2. From page two of the Offline menu, press F2-PARAM ENTRY to display
page one of the Parameter Entry menu.
3. Press F1-CHG PARAM to display page one of the Change Parameter menu.
From this menu you can change Table, Plot, and Paper Advance
parameters.
4. From page one of the Chg Param menu, press the Menu key to display
page two.
From page two, you can change Servo, Inkjet, and Miscellaneous
Parameters.
CHG PARAMETER . . .
TABLE PAPER ADV
PLOT EXIT
PARAM ENTRY . . .
CHG PARAM SAVE PARAM
LOAD DEFAULT EXIT
CHG PARAMETER . . .
SERVO INKJET
MISC EXIT

Gerber Technology AccuPlot AP-100 Specifications

General

Brand	Gerber Technology
Model	AccuPlot AP-100
Category	Plotter
Language	English