10
C. Gerhardt GmbH & Co. KG
18 Distillate outlet tubing, silicone 8/12
19 pH electrode holder
The holder can be filled with potassium chloride solution 3.5 mol/l (included in the delivery).
Here you can store the electrode when it is not in use to prevent the porous frit from drying out.
20 Sensor for level detection
The built-in sensor stops the program if the receiver vessel overfills during the distillation and
titration.
21 pH-electrode (combined electrode)
Combined electrode with screw thread.
For further details please check the enclosed instructions by the electrode’s manufacturer.
22 Inlet tubing for titration acid
23 Stirring motor with propeller
24 Tubing for suction of the distillate
25 Inlet tubing for boric acid,
is behind the tubing for suction of the distillate
26 Receiver vessel
For easy removal turn the glass through 90° and pull it downwards.
27 Drip tray
Condensate which might drip is collected in the drip tray. Make sure to clean the tray regularly.
** Protection door (not illustrated)
Whenever you run the distillation system make sure you shut the protection door!
DESCRIPTION OF THE EQUIPMENT
To Next Page
Loading...
