35
C. Gerhardt GmbH & Co. KG
11.3.2. Serial determination
1. Insert the inlet tubing into the digestion tube.
2. Press down quick clamping device and insert digestion tube.
3. Check correct fit of the tube.
4. Close protection door and turn on equipment.
5. Press key "Analysis" in order to get into the analyse menu.
It is suggested to start a series with position 1.
But if you wish you can start with any position.
Use keys "left" or "right" to move and mark star-
ting position with cursor "up".
X = starting position
Select a series that has already been defined
using numeric keys.
Enter
Enter normality of titration acid used. If a correc-
tion value has been determined enter it as well.
Enter
Enter
7.
8.
9.
Press "Serial Determination".
6.
Enter
ANALYSIS
To Next Page
Loading...
