40
C. Gerhardt GmbH & Co. KG
- Data transfer
If data transfer is selected a file name is given as well. The first position is already defined as V but
the remaining 7 positions can be allocated as desired by using the numeric keys. The data transfer is
started by pressing "Enter".
- Correction
If results are selected in order to be corrected there can be another subdivision of a series. This
subdivision is only possible for the blank value and the unit (calculation of the result) but the norma-
lity of the titration acid and the factor have to be recalculated for all results of a series. The correction
of single results is not possible.
Select option eg. blank value for a series that used
several programs.
If "Titre" or "Factor" is selected the actual value
is displayed and may be overwritten. Confirm va-
lues entered by pressing "Enter".
If "Blank Value" or "Unit" is selected it is important
whether one or several programs have been used
during the series. If several programs have been
used a selection is made by pressing keys "up"
or "down". By pressing „right“ they are marked
and by pressing "left" they are demarked. Then
the value displayed can be simply overwritten.
Corrections are marked as such when printed.
STATISTICS
To Next Page
Loading...
