Gerhardt VAPODEST 50 - Page 48

47
C. Gerhardt GmbH & Co. KG
Parts description Order No.
Water inlet tubing 10/17, 2 m 22802
Silicone tubing 6 x 10 20903
Silicone tubing 8 x 12 22704
Silicone tubing 4 x 7 20914
Silicone tubing 16 x 8 22705
Novoprene-tubing 4,8 x 1,6 20919
Verprene-tubing 4 x 8 20920
Verprene-tubing 8 x 12 20921
PTFE-tubing 4 x 6 x 135 21902
Isoversinic-tubing 21918
Inlet tubing for micro dosing pump (with screw cap) 11812
Outlet tubing for micro dosing pump (with screw cap) 11813
Tubing reduction, PP 51 x 10 x 10 50022
Tubing reduction, PP 51 x 10 x 5 50023
PVC-tubing 4/7, 2 m 22601
PVC-tubing 8/12, 2 m 22604
PVC-pipe 6 x 1, 420 mm 25450
PVC-pipe 10 x 1, 420 mm 25451
Set of storage tanks (KAN 50) 7659
Level sensor with plug for H
2
O, H
3
BO
3
and NaOH-tank 11320
Level sensor with plug for „Sample waste“ tank 11321
Level sensor with plug for titration tank 11323
RS 232/485 Adapter ARS 4260
Data cable DK 42 for RS 485, 2 m 4261
Data cable DK 45 for RS 485, 5 m 4262
Data cable DK 22 for RS 232, 2 m 4264
Terminator AST 4265
Viton cone VK, micro, for 100 ml tubes KMT 7671
PP-distribution head Devarda VPD 7, bottom part 7474
Glass distribution head Devarda VGD 7, top part 7475
Ventilation valve condenser (glass) 30244
Condenser, shortened 7676
PP-adaptor 40213
PP-distribution head distance piece 50025
Screw cap GL 32, open version 16604
Silicon-/PTFE seal GL 32 16607
MAINTENANCE
Interface
Micro
Devarda