Gesipa taurus 2 - Spreader Nosepiece With Opening Mechanism

Table of Content Page
1. Conditions of use .................................................................................. 12
2. Safety Notes ........................................................................................... 12
3. Working Range ..................................................................................... 12
4. Technical Data ........................................................................................ 12
5. Equipment/Accessories ........................................................................ 13
6. Nosepiece table ..................................................................................... 13
7. Starting Procedure
7.1 Installing the mandrel container
............................................................ 14
7.2 Selecting and changing a nosepiece
...................................................... 14
7.3 Setting a blind rivet
............................................................................... 14
7.4 Suction and holding a blind rivet
........................................................... 14
7.5 Emptying the mandrel container
............................................................ 14
8. Maintenance and Care
8.1 Lubricating the jaws
.............................................................................. 14
8.2 Changing jaws
...................................................................................... 14
8.3 Refilling the hydraulic fluid
.................................................................... 14
8.4 Storage conditions
................................................................................ 15
9. Repair operations ................................................................................. 15
10. Troubleshooting
10.1 Blind rivet does not set
........................................................................ 15
10.2 Spent mandrel is not evacuated
.......................................................... 15
11. Warranty Conditions ............................................................................ 15
12. Conformity Declaration ................................................................ 16
11