53NRR 2-52, NRR 2-53, URB 55 - USA- Installation & Operating Manual - 850698-00
Configuring the level controller
Automatic/Manual mode
The controller is normally in auto-
matic mode. Press the button to
switch the controller to
manual mode.
Here, if the controller is configured
as a valve controller, an input field
opens in which you can enter
the valve position or manipulated
variable.
If the controller is configured as a
pump controller, the manipulated
variable is entered
and the pump is switched on
/ off.
Manual mode is not disabled
automatically.
Valve control in manual mode (example)
Pump control in manual mode (example)
To Next Page
Loading...
