Getinge S-363 - Manual Discharge Damper

4.2 Manual discharge damper
There is a discharge damper which reduces the discharge in case
the ventilation in the installation is strong.
At installation, manually adjust the discharger
damper so it suits the ventilation capacity.
004834
A B
1 2
1
2
A. Wall hung singel door model, S-363E
1. Handle
2. Discharge damper
B. Recessed two door pass-through version, hole
in wall must be 615x2190
1. Handle
2. Discharge damper
For ventilation requirements, see section 3 TECHNICAL DATA.
4 INSTALLATION
USER MANUAL GETINGE DRYING CABINET S-363 11 (24)
<Doc_6001300802><Rev.C><Lang_en>