Getinge S-363 User Manual

1 INTRODUCTION
1.1 Intended use
The drying cabinet is designed for fast and sparing drying of
anesthetic tubing, such as hoses with smooth or corrugated
surfaces, bellows, breating masks and surgical instruments in
trays. All goods to be loaded must have passed an acknowledged
cleaning and disinfection process in a washer-disinfector.
The drying cabinet is designed for use in soiled and clean areas of
CSSDs, TSSUs and other departments where efficient drying of
equipment is important.
1.2 Product liability
1.2.1 Declaration of Conformity
The product compliance is stated in the Declaration of Conformity.
1.2.2 Disclaimer
• The manufacturer cannot guarantee that the product will work
as intended if accessories or spare parts other than those
approved by the manufacturer are used.
• The product liability only applies when the instructions in this
manual have been followed in their entirety.
• The manufacturer accepts no responsibility for personal
injuries when the instructions in this manual have not been
followed in their entirety.
• The manufacturer reserves the right to change the
specification and design of the product without any prior
notice.
1.2.3
Manufacturer
This product was manufactured by:
GETINGE DISINFECTION AB
Ljungadalsgatan 11
PO Box 1505
SE-351 15 Växjö, Sweden
1.2.4 Warranty
The product warranty applies in accordance with the agreement
reached between the Getinge sales company and the customer.
1 INTRODUCTION
USER MANUAL GETINGE DRYING CABINET S-363 5 (24)
<Doc_6001300802><Rev.C><Lang_en>

Getinge S-363 Specifications

General

Brand	Getinge
Model	S-363
Category	Medical Equipment
Language	English