6 DIRECTIONS FOR USE
1. Display 4. Temperature selection
2. Increase 5. LED
3. Decrease 6. Start/stop
Cassettes together with moist hoses should be lifted directly into
the drying cabinet, where they are slid in on guides.
1. Respiratory bellows are placed in the cassette designed for
the purpose.
2. Racks for instruments etc. are placed on the rack shelves.
3. Select the required drying temperature, 70 °C or 90 °C by
pressing the temperature select button.
4. Set the required drying time on the display. Increase the time
by pressing A, decrease the time by pressing B.
5. Start the drying operation by pressing the start/stop button.
The LED comes on when the drying process starts.
Note!
Do not disconnect the power supply during the drying
process.
6. Drying is complete when the display shows 0.
Note! It is time to clean the filter cassette when the
display alternates between and the drying time.
7. Digital display of chamber temperature.
By pressing the two arrow keys and the temperature selection
button and the start/stop button simultaneously, the chamber
temperature will be indicated on the digital display. After
displaying the temperature for 2 minutes the display window
will revert to showing the count-down drying time.
6 DIRECTIONS FOR USE
14 (24) USER MANUAL GETINGE DRYING CABINET S-363
<Doc_6001300802><Rev.C><Lang_en>
To Next Page
Loading...
