GEZE GC 342 - Page 37

37
Technical dataGC 342 safety sensor
Setting angle +2° … +10° (without xture)
Protection rating IP54 (EN 60529)
Temperature range -30°C … +60°C in operation
Humidity 0 to 95%, non-condensing
Vibration < 2 G
Min. door leaf speed 2°/sec.
Standard conformity EN 12978, EN ISO 13849-1Pl “d”/ CAT2; IEC 60825-1; EN 60950-1;
EN61000-6-2; EN 61000-6-3; EN 62061 SIL 2;
DIN 18650-1 Chapter 5.7.4 (Reference body CA);
EN 16005 Chapter 4.6.8 (Reference body CA);
GEZE hereby declares that the GC342 is in compliance with the basic require-
ments and other relevant requirements of the directives EMC 2014/30/EU,
LVD 2014/30/EU, MD 2006/42/EC and RoHS2 2011/65/EU.
Named oce for EC type testing: 0044 - TÜV NORD CERT GmbH, Lange-
marckstr. 20, 45141 D-Essen
EC Certicate of Conformity number: 44 205 13089618
Leonberg, May 2016
Christoph Lieske, Authorised signatory and responsible for Technical
Documentation
The complete Declaration of Conformity can be downloaded from our website.
For EU countries: In compliance with Directive 2012/19/EU concerning Waste
Electrical and Electronic Equipment (WEEE)