Gfp 563TH - Installation Procedures; 9 A. Uncrate the Machine; 9 B. Remove Heat Tube Package

Gfp
563TH
December 2012
10
9. Installation
9 A. Uncrate the machine
1. Remove screws around the base of the crate including corner supports
2. Lift crate straight up and off the skid
9 B. Remove Heat tube package from inside crate top
3. Remove nuts on heater support brackets that hold the cardboard tube to
the inside of the crate and remove the heater package
Heat tube
package
Crate
Heater support bracket