5
4. General Safeguards
• Keep hands, long hair, loose clothing, and articles such as neckties away from
rollers to avoid entanglement and entrapment. The rollers have pinch points
that can trap body parts or clothing and cause serious injury
• Do not use the machines for purposes other than lamination and mounting,
otherwise damages to the machine or accidents may occur
• Keep out of reach of children
• Keep flammable and wet objects away from the machine.
• Do not use flammable sprays or materials when cleaning the machine
• Do not leave the machine unattended during operations.
• Do not mount metal materials or other hard objects.
• Do not put burrs, sharp blade or rigid materials in between the two rubber
rollers.
• Do not attempt to laminate items that exceed total recommended material
thickness of the unit.
• Do not touch the rollers when they are hot or place foreign object inside the
machine.
• Do not cut adhesive films directly on the surface of the rollers to avoid
damaging the rubber coating.
• Shut down the machine after laminating to avoid misusing this machine by
others.
• Shut down the power before moving the machine
• Note the locations of foot wheels while moving or operating this machine to
avoid injuries to your feet.
• Disconnect from the power supply before repair or maintenance.
• Disconnect from the power supply when the machine is not in use for
a long time.
• When the machine lies idle for a long period of time, raise the top rubber
roller to avoid the distortion of the rubber surface.
• Do not cover the surface of the machine until the machine has completely
cooled.
• Perform only the routine maintenance procedures referred to in these
instructions
To Next Page
Loading...
