Gfp 563TH - Additional Installation and Removal; 12. Additional Installation Items; Plug Foot Pedal and Check Components; 13. Removing Press Roller Assembly

Gfp
563TH
December 2012
18
12. Additional Installation items
1. Plug foot pedal into front panel below controls
2. Check drive chains for tightness
3. Check all drive set screws for tightness
4. Check all electrical connections and input power and test for proper operation
13. Removing Press Roller assembly
1. Unscrew knurled thumb screw securing left side of Press roller assembly
2. Lift off and remove Press Roller assembly