Remote Error Messages
2500A Series Operation Manual, 34172 Revision C, March 2008
58 Invalid name for characterization variables.
59 No heap space is available for storing characterization data.
60 Heap is not allocated for storing characterization data.
61 A float variable has been viewed previously.
62 Unable to erase data in flash.
63 Checksum mismatches for characterization data in flash and heap.
64 Heap allocation has been done previously.
65 List RF off time is out of range.
66 Incorrect password for setting minimum list step time.
67 Unable to update parameter block data.
68 List step time is out of range.
69 FM deviation is out of range.
70 FM sensitivity is out of range.
71 PM internal PRI is out of range.
72 PM internal width is out of range.
73 PM internal sync out delay is of out of range.
74 CW power slope is out of range.
Table B-2: 2500A Error Messages
2500A ERROR # 2500A ERROR MESSAGE
To Next Page
