Chapter 1: 2500A Introduction
14 2500A Series Operation Manual, 34172 Revision C, March 2008
1.1.2 2500A Options
The following briefly describes the options that are available within the various series of the 2500A.
Appendix A further describes the options:
• Option 17A- Delete Modulation
• Option 17B - Delete Modulation Function Generator
• Option 18- Delete 10 MHz - 2 GHz Frequency Extension
• Option 23 - Type N Connector (2520 Models only)
• Option 26- Delete 90 dB Step Attenuator
• Option 31- Reduced Frequency Switching and Pulse Width Performance
• Option 44- Delete Display Front panel
• Option 46- Rack Slide Kit
• Option 55- Command Sets
• 55A - HP 8370
• 55B - HP 8340
• 55C - HP 8673
• 55D - HP 8662
• 55E - Systron-Donner 1720
• 55F - Wavetek 90X
• 55G - HP 8350
• 55H - HP 8360
1.1.3 Items Furnished
Accessories and Options are detailed in Appendix A of this publication. In addition to the options and/or
accessories specifically ordered, the following items are furnished with the instrument:
• Operation Manual
• USB 1.1/RS-232 Cable Adapter
• Power Cord, 6 ft.
• Giga-tronics Automation Xpress Software Package
1.1.4 Items Required
No special items are required to operate the 2500A Series during local (front panel) operation. Remote
operation requires some of the following items depending on the interface used:
• IEEE 488 Interface Cable
• PC with GPIB, RS-232, or USB
To Next Page
Loading...
