Gigabyte MNJ190I-FH - Internal Connectors

Hardware Installation
- 12 -
1-5 Internal Connectors
1) DC_OUT
2) DC_IN
3) SATA0
4) SATA1
5) SATAPW_1
6) COM2
7) COM4
8) COM3
9) COM5
10) JCOM2
11) JRS1
12) JRS2
13) JRS3
14) JRS4
15) LVDS
16) JRS6
17) LVDS_PWR
18) LCDPWR_CON
19) BKL_CN
20) BLKTEN_CON
21) F_USB2
22) F_USB1
23) GPIO_CNT
24) F_AUDIO
25) SPK_OUT
26) F_PANEL
27) LPT
28) CASE_OPEN
29) HDMI
30) CPU_FAN
31) SMB_I2C
32) BAT
33) CLR_CMOS
Read the following guidelines before connecting external devices:
• First make sure your devices are compliant with the connectors you wish to connect.
• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1
2
4
5
3
6
7
8
9
22
26
25
24
20
21
19152425
32
30
31
33
28
29
27
18 16
10
14 13 12 11 17
23