Gigabyte MNJ190I-FH - Product Specifications

Hardware Installation
- 8 -
1-2 ProductSpecications
CPU  Support for Intel
®
Celeron
®
J1900 (2.0 GHz) processor
 TDP 10W
 L1/L2 cache varies with CPU
Memory  1 x SO-DIMM slots support 1.35V DDR3L 1333MHz
 Support up 8GB
Audio  Realtek
®
ALC262 Codec
 HighDenitionAudio
 2 channel
LAN  2 x Realtek RTL8111G GbE controllers supports 10/100/1000 Mbps
Expansion Slots  1 x Mini PCI Express slot (half size)
Onboard
Graphics
 Build in Intel
®
Intel
®
processor
Storage Interface  1 x SATA 3Gb/s connector
 1 x 7 pin & 15 pin SATA connector
USB  Up to 8 USB 2.0 ports(4 on the back panel, 3 via the USB
 brackets connected to the internal USB headers, 1 header – F_USB1 co-lay
with USB port – S_USB)
 1 x USB 3.0 ports
Internal
Connectors
 1 x 4 pin ATX 12V power connector
 1 x SATA 3Gb/s connector
 1 x SATA Power connector
 1 x 7 pin & 15 pin SATA connector
 1 x CPU fan header
 5 x Serial port cable connectors
 1 X COM RS232/RS422/RS485 select header
 1 x Front panel header
 1 x Front Panel Audio header
 1 x USB 2.0 header
 1 x LVDS connector
 1 x Brightness control connector
 1 x Parallel port connector
 1 x GPIO connector
 1 x Speaker out header
 1 x SMBus I2C connector
 1 x HDMI connector