Gigabyte MNJ190I-FH - HDMI (HDMI Connector); CPU_FAN (CPU Fan Header)

Hardware Installation
- 24 -
29) HDMI (HDMI Connector)
The HDMI port is HDCP compliant. You can use this port to connect your HDMI-
supported monitor. The maximum supported resolution is 4096x2160@24Hz or
3840x2160@24Hz/25Hz/30Hz, but the actual resolutions supported are dependent on the monitor being
used.
30) CPU_FAN (CPU Fan Header)
The motherboard has one 4-pin CPU fan header (CPU_FAN) header. Most fan headers possess a
foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation
(the black connector wire is the ground wire). The motherboard supports CPU fan speed control,
which requires the use of a CPU fan with fan speed control design. For optimum heat dissipation, it is
recommended that a system fan be installed inside the chassis.
4
1
DEBUG
PORT
G.QBOFM
PinNo. Denition
1 GND
2 +12V
3 Sense
4 Speed Control
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
• Thesefanheadersarenotcongurationjumperblocks.Donotplaceajumpercapontheheaders.