Gigabyte MNJ190I-FH - CLR_CMOS (Clearing CMOS Jumper)

Hardware Installation
- 26 -
33) CLR_CMOS (Clearing CMOS Jumper)
 Use thisjumperto clear theCMOS values (e.g.dateinformation and BIOScongurations) and reset
the CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the two pins to
temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few
seconds.
1-2 Close: Normal operation (Default setting)
2-3 Close: Clear CMOS data
1
1