Gigaset E560 A - Base Volume and Ringer Configuration; Adjusting Base Call Volume; Configuring Base Ringers (Volume and Melody); Resetting Base Unit to Default Settings

47
Gigaset E560A / LUG GBR en / A31008-M2708-L101-1-7619 / settings_BS.fm / 7/14/16
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Base settings
Changing the call volume
You can set the handsfree volume to five different levels (1–5; e.g., volume 3 = ).
¤ Menu Settings OK Audio/Visual Signals OK Base Audio Settings
OK Speaker Volume OK Adjust the volume and press OK.
Changing ringers
• Volume:
Five volume levels (1–5; e.g., volume 3 = ) and "Off" (volume 0 = ).
• Melody:
List of pre-loaded ringer melodies. The first three melodies are the "classic" ringtones.
• Time control:
You can specify a time period when you do not want the telephone to signal external calls
e.g., during the night.
¤ Menu Settings OK Audio/Visual Signals OK Base Audio Settings
OK Ringer Volume / Ringtones / Time Control OK
If Ringer Volume / Ringtones is selected:
¤ (Select volume/melody) OK ( = melody selected)
If Time Control is selected, activate and set time control:
¤ Activation OK (= activated)
¤ Settings OK Starting Time: /Ending Time:
Enter each time as a 4-digit number and press OK.
Resetting the base to the default settings
When the settings are restored:
• Date and time are retained
• Handsets are still registered,
• Eco Mode and Eco Mode+ is deactivated,
• The system PIN is not reset.
¤ Menu Settings OK System OK Reset Base OK
All handsets are de-registered and must be re-registered. All settings are reset to the
default settings.
The answer machine is ready for use approx. 15 seconds after the base has been con-
nected or reset.