Gigaset E560 A - Special Phone Functions: One Touch Call and Torch; Configuring One Touch Call; Using the Torch Functionality

38
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
One touch call
Gigaset E560A / LUG GBR en / A31008-M2708-L101-1-7619 / applications_LUG.fm / 7/14/16
One touch call
You can set up your phone so that you can dial a specific number when you press any key on the
keyboard. This allows children, who are unable to enter a number, to call a certain number, for
example.
¤ Menu One Touch clock OK Activation OK (=activated)
If you activate the one touch call, the menu automatically opens up afterwards in order to enter
the destination number.
¤ Call Target: Enter or change the number that you wish to dial. OK
The activated One Touch Call appears on the idle display. The saved number is dialled by press-
ing any key. Press the End call key to cancel dialling.
Ending one touch call mode
¤ Press display key Off Press and hold the key.
or: Press and hold the key
Torch
You can use your telephone as a torch.
Activating/deactivating the torch function
If you have already assigned the emergency function to the key , the emergency
number is also selected if a one touch call is initiated.
Switch on:
¤ Menu Flashlight OK . . . the torch is activated.
Switch off:
¤ Off (After 2 minutes the function is automatically deactivated. )
The function is automatically deactivated if the emergency function is pressed.
If the torch is activated, all functions are locked, however the emergency function still
works.
The torch LED can also be used as an optical call signal for incoming calls ( p. 44).