Gigaset E560 A - Initial Setup: Package Contents and Base Connection; Package Contents Checklist; Connecting the Base Station

7
Gigaset E560A / LUG GBR en / A31008-M2708-L101-1-7619 / starting.fm / 7/14/16
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Connecting the base
Getting started
Contents of the package
• One Gigaset E560A base
• One Gigaset handset
• Two batteries
• One battery cover
• One power adapter for the base
• One phone cord
• One user guide
• one plastic cover for the tab
If you have purchased a model with multiple handsets, the package should contain the follow-
ing for each additional handset:
• two batteries
• one battery cover
• one charging cradle
• one power adapter
Connecting the base
The base station and charging cradle are designed for use in closed, dry rooms within
a temperature range of +5 °C to +45 °C.
The device's feet do not usually leave any marks on surfaces. However, due to the mul-
titude of different varnishes and polishes used on furniture, contact marks on the sur-
faces cannot be completely ruled out.
Never expose the telephone to heat sources, direct sunlight or other electrical
devices.
Protect your telephone from moisture, dust, corrosive liquids and vapours.
¤ First, connect the telephone jack
and insert the cables into the cable
ducts.
¤ Then connect the power adapter .
1
2
1
2
The answer machine is ready for use approx. 15 seconds after the base has been con-
nected or reset.