Gigaset E720-E720A / LUG_Kombi CH en / A31008-M2903-F101-1-2X19 / applications_1.fm / 4/21/20
Template Module, Version 2, 20.02.2020
Baby monitor
55
Activating and setting the baby monitor
The destination number is displayed in idle display when the baby monitor is activated.
Deactivate baby monitor / cancel alarm
Deactivate the baby monitor remotely
¤ Accept alarm call Press keys
The baby monitor is deactivated and the handset is in idle status. The baby monitor settings
on the handset (e.g. no ringtone) will remain activated until you press the display key OFF.
¤ . . . use to select Additional Features OK
Baby Monitor OK . . . then
Switch on/off:
¤ Activation: . . . use to select On or Off
Enter destination:
¤ Send alarm to . . . use to select External or
Internal
External: Number . . . use to select number
or select a number from the directory:
Internal: Handset Change . . . use to
select the handset OK
Activate/deactivate two-way talk:
¤ Two Way Talk . . . use to select On or Off
Set microphone sensitivity:
¤ Sensitivity . . . use to select High or Low
Save settings: Save
Deactivate the baby monitor:
¤ In idle status press the display key OFF
Cancel the alarm:
¤ Press the End call key during an alarm
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.
The baby monitor cannot be reactivated remotely.
Reactivate: p. 55
07:15
INT 1
14 Oct
Baby Monitor
0891234567
OFF Options
Baby Monitor activated
To Next Page
